PC ARM Linux

Descrizione

Le schede PC ARM sono disponibili in configurazione DUAL CORE e QUAD CORE e supportano sistemi operativi Android e Linux. Possiamo fornire su richiesta un kit di sviluppo software che supporta già alcuni protocolli di periferiche (tra cui lettori di banconote ID-003 JCM) tramite tecnologia WebSocket.

Informazioni aggiuntive

Processore

– Freescale i.MX6 Family, based on ARM ® CORTEX-A9 processors:- i.MX6DL Dual Lite – Dual core up to 1GHz per core- i.MX6Q Quad – Quad core up to 1GHz per core

USB

– 2 x standard USB 2.0 Type A- Internal USB 2.0 connector- 1 x USB micro-B client connector

Memoria

– Soldered down DDR3L memory- i.MX6Q, i.MX6DL: up to 1GB 64-bit interface- i.MX6S: up to 512MB 32-bit

Audio

– AC’97 Audio Codec Realtek ALC655- Mic In, Line out Audio jacks

Grafica incorporata

– Dedicated 2D Hardware accelerator- Dedicated 3D Hardware accelerator, supports – – OpenGL ® ES2.0 3D TM- Dedicated Vector Graphics accelerator supports – OpenVG (only i.MX6Q)- Supports up to 3 independent displays with i.MX6Q- Supports 2 independent displays with i.MX6DL and i.MX6S

Interfaccia grafica

– 1 x LVDS Dual Channel or 2 x LVDS Single Channel 18/24 bit interface (resolution up to 1920×1200)- HDMI Interface (resolution up to 1080p)

Memoria di massa

– Optional onboard eMMC Disk, up to 16GB *- SATA connector (only for i.MX6Q)- MicroSD card slot

Connessioni

– Gigabit Ethernet connector- Additional Wi-Fi module on internal USB connector

Sistemi operativi supportati

– Linux
– Android

Opzioni aggiuntive

– Optional CAN Bus connector- I2C touch Connector- MIPI-CSI Camera connector- Debug UART on dedicated connector- Embedded additional RTC circuitry for lowest power consumption- Power and reset buttons

Connettore 32-pin di espansione configurabile

– Up to 28 GPIO- SPI interface- SPDIF Audio interface- 2 x CAN interface (TTL level)- SDIO interface- 3 x PWM- 2 x I2C- 3 x UARTs (TTL, RS-232, RS-485 modes)

Alimentazione

– +12V DC ± 10%

Ambiente ottimale

– da 0°C a +60°C** (versione commerciale)- da -40°C a +85°C** (versione industriale)

Dimensioni

– 110 x 86.5 mm (4.5” x 3.7”)